Carbon Dioxide Detector
E2609 Carbon Dioxide detector is a perfect device for air quality control and CO2accumulation prevention in the environment. Its compact size and optimal power intake make it mountable to almost any place in the building.
Easily configurable, E2609 is set by default to monitor CO2 concentration in the range from 0 to 10 000 ppm and to switch the built-in relay as soon as the gas concentration exceeds user adjustable set level.
After the reading has dropped below the alarm release level, the relay returns to normal state. The built-in relay can be used to automatically turn on/off a fresh-air fan or ventilation systems.
With its ease of use, the E2609 is perfect for homes, offices, meeting rooms, or anywhere where controlling indoor air quality is required to ensure the occupant’s comfort.
Carbon Dioxide Detector
- Stable long-life NDIR CO2 sensor
- Range 0...10 000 ppm
- Resolution 20 ppm
- Adjustable alarm setpoints
- 0-10 V, RS485
| Calibration | Carbon dioxide |
| Sensing method | Long-life NDIR CO2 sensor |
| Sampling method | Diffusion |
| Detection range | nominal 0...5000 ppm vol |
| max 0...10 000 ppm vol | |
| Accuracy | ±30 ppm ±3% of measured value |
| Sensor lifetime | > 15 years |
| Power supply | 24 VDC |
| Digital interface | RS485, Modbus RTU protocol |
| Analog output | 0-10 V, linearized, configurable |
| Output relays | 250 VAC / 30 VDC, 5 A max |
| Default alarm set-points | User settable |
| Enclosure | Slotted light gray ABS plastic |
| Dimensions | H85 × W85 × D36 mm |
| Operating conditions | 0...+50 °C, 0...95 %RH |
cerere de oferta
